DIY Guide: How to Replace a Window Pane in a Metal Frame

Do you have a window in your home with a broken pane? Replacing the glass can be a daunting task, but it doesn’t have to be! In this DIY guide, we’ll show you how to replace a window pane in a metal frame so you can get back to enjoying the view outside. With just a few simple tools and some patience, you’ll soon have your window looking like new. Let’s get started! 

Need a window contractor you can trust?

Call us (509)201-4190 or send the form

Disclaimer: This DIY guide is meant to provide general advice and should not be interpreted as professional installation instructions. All readers are advised to contact a qualified contractor for any window pane replacement project to ensure safety and proper installation. Advance Roofing LLC has been offering top-notch roofing solutions in the Spokane, WA area for years, so if you need help with your window pane replacement project then turn to us – we’ll be glad to assist!

What You Will Need 

If you have a broken window pane on a metal frame, it may seem like a daunting task to replace it. However, with the right tools and a bit of know-how, it can be a fairly simple DIY project. Here’s what you will need: 

  1. Safety goggles or glasses: Protecting your eyes during this process is essential. You don’t want any glass shards flying around and potentially causing an injury. 
  2. Putty knife: You’ll need this to remove the old glazing compound and any remaining glass pieces from the frame. 
  3. Heat gun: This tool will come in handy for removing the old glazing compound from the frame. Applying heat to the compound will make it easier to remove. 
  4. Replacement glass: Make sure you measure the size of the window before purchasing your replacement glass. You want to ensure that it is the correct size to fit your frame. 
  5. Glazing tape or compound: This is what will hold the new glass in place and seal the window. There are different types of compound available, so make sure you choose the right one for your specific window type. 
  6. Metal triangles: These will hold the new glass in place while you apply the glazing tape or compound. 
  7. Spring clips: These can be used to secure the metal triangles and keep the new glass in place while the compound sets. 

With these tools on hand, you’ll be ready to tackle the window pane replacement project. Once you’ve gathered your supplies, you can move on to the next step of removing the broken pane. 

Safety Tips 

When it comes to replacing a window pane in a metal frame, safety should always be your top priority. Even the smallest mistake can cause injuries that can be avoided by taking some precautions. Here are some safety tips to keep in mind:

  1. Wear protective gear: Put on safety goggles or glasses to protect your eyes from glass shards that may break during the process. Gloves can also help protect your hands from cuts. 
  2. Work with caution: Handle the glass with care and avoid applying too much pressure while working with the old glazing compound. If you’re not familiar with this process, take your time and proceed with caution. 
  3. Clean up: Once you’ve removed the old glass and glazing compound, clean up any debris thoroughly. You don’t want someone accidentally coming across a sharp piece of glass while walking around. 
  4. Use the right tools: Make sure you have all the necessary tools and materials for the job before you start. Using the wrong tools can lead to accidents and injuries. 
  5. Get help: If the window is large or heavy, don’t hesitate to ask for help. It’s always better to have an extra set of hands when working with large, fragile pieces of glass. 

By following these safety tips, you can ensure that you complete the window pane replacement task without any potential accidents or injuries. Remember, safety comes first! 

Step 1: Remove the Old Window Pane 

This can be a delicate process, as you must ensure that you do not break any of the remaining glass or damage the frame itself. 

Before you begin, make sure to put on your safety goggles or glasses and gloves. These will protect you from any stray shards of broken glass that may come loose during the removal process. 

Next, use a putty knife to carefully remove any old glazing compound or caulking around the edge of the frame. This will allow you to access the edges of the window pane and remove it from the frame. 

Once the glazing compound has been removed, gently push on the glass from the opposite side of the frame to loosen it from the metal frame. Be careful not to force it, as this can cause the glass to break and create a safety hazard. 

If the window pane is double-pane glass, you may need to remove the metal triangles or spring clips that hold the glass in place. These can be removed gently using a pair of pliers. 

After the glass has been removed, carefully dispose of it in a secure and appropriate manner. Remember that broken glass should never be placed in regular trash or recycling containers. 

With the old pane removed, you can now proceed with replacing it with a new one. This will involve measuring the dimensions and selecting the right type of glass for your replacement needs. 

By following these steps carefully and with caution, you can safely remove the old window pane and set the stage for successfully installing a new one.

Securing the sash, as well as any weatherstripping or seals that may need to be carefully removed. 

Now it’s time to start removing the sash. If you’re working with a traditional wood frame window, you can often simply slide the sash up or down to remove it from the frame. However, if you’re dealing with a spring balance or other mechanism, you may need to use pliers or a pry bar to carefully pop the sash out of the frame. 

Be sure to work slowly and carefully to avoid damaging the window fraьe or sash. If you encounter resistance, stop and look for any additional screws, pins, or fasteners that may be holding the sash in place. Once you’ve successfully removed the sash, set it aside in a safe place until you’re ready to re-install it. 

Removing the window sash may seem like a daunting task, but with the right tools and a little patience, it’s a manageable DIY project that can help you upgrade your home’s windows and improve your energy efficiency. 

Removing Spring Clips and Metal Triangles 

When replacing a window pane in a metal frame, you may encounter spring clips or metal triangles that are holding the pane in place. Before you can remove the broken glass, you need to carefully remove these pieces to ensure that you can install the new pane securely. 

To remove spring clips, use a putty knife to gently pry them out of the frame. Start at one end and work your way along the edge of the frame, wiggling the putty knife back and forth until the clip pops out. Be careful not to apply too much pressure, as this can damage the frame or the clip. 

Once the spring clips are removed, you may be able to slide the broken pane out of the frame. However, if the pane is shattered or stuck in place, you may need to remove metal triangles that hold the pane in place. These pieces can be a bit trickier to remove, but with the right tools and technique, you can do it safely. 

Before removing metal triangles, put on a pair of safety goggles to protect your eyes from any glass shards that may fly around. Then, using a heat gun on a low setting, gently warm up the metal to loosen it from the frame. Hold the heat gun at a 45-degree angle and move it back and forth across the metal triangle, taking care not to touch the glass. 

Once the metal is warm, use pliers to carefully bend the triangle out of the frame. You may need to wiggle it back and forth a bit to loosen it completely. Once the triangle is removed, use a putty knife to remove any remaining glazing compound or adhesive from the frame. 

Removing spring clips and metal triangles can be a bit time-consuming, but it’s an essential part of replacing a window pane in a metal frame. By taking your time and using the right technique, you can safely remove these pieces and install a new pane that will keep your windows in top shape. 

Clean Up Broken Glass Shards 

One of the most important steps to take after breaking a window pane is cleaning up the broken glass shards. The last thing you want is for someone to accidentally step on a piece of glass and get injured. Here are some tips for cleaning up broken glass shards: 

  1. Wear gloves and sturdy shoes: Before you start cleaning up the broken glass shards, make sure you’re wearing gloves to protect your hands and sturdy shoes to protect your feet from any glass pieces that might have fallen on the floor. 
  2. Use a broom and dustpan: Sweep up the large glass pieces using a broom and dustpan. Be sure to sweep carefully to avoid pushing any glass particles into the floor or carpet. 
  3. Vacuum the area: After you’ve swept up the larger pieces, vacuum the area thoroughly to pick up any remaining glass shards. Use the hose attachment to get into corners and hard-to-reach areas. 
  4. Check the surrounding areas: Don’t forget to check surrounding areas like countertops and furniture for glass shards. Run a damp paper towel over these surfaces to pick up any small pieces that might be lurking around. 
  5. Dispose of glass properly: Once you’ve collected all the glass shards, dispose of them properly. Wrap them up in newspapers or place them in a sturdy plastic bag and seal it tightly. Then, place the bag in a trash can with a lid to prevent anyone from accidentally getting cut by the broken glass. 

By following these steps, you can clean up broken glass shards safely and effectively. Remember to take your time and be thorough, as even small pieces of glass can be dangerous if left unchecked. 

Step 2: Measure for Replacement Glass 

After safely cleaning up the broken glass shards from your metal-framed window, it’s time to measure for the replacement glass. Whether you’re working with a single-pane window or a double-pane window with argon gas, measuring accurately is crucial to ensure the replacement glass ts properly and seals correctly. 

To measure for replacement glass, you’ll need a tape measure, a notepad or paper to record your measurements, and a pen or pencil. It’s important to measure the height and width of the opening, as well as the thickness of the glass. 

Start by measuring the height of the opening from the top of the metal frame to the bottom. Then, measure the width across the middle of the opening from one side of the frame to the other. Remember to measure to the nearest 1/16th of an inch to ensure accuracy. 

If you’re unsure about the type of glass or thickness you need for your window, consider reaching out to a professional for assistance. They can help you determine the right type of glass to use and may even be able to order the replacement glass for you.

In summary, measuring accurately is key when it comes to replacing a window pane in a metal frame. Take the time to measure the height, width, and thickness of the opening and record your measurements carefully. This will ensure a proper t and help to prevent any additional repairs down the line. 

Step 3: Cut New Window Pane to Size (Optional) 

After you have measured the size of your window opening and determined the type of glass needed, it’s time to cut the replacement window pane to size. If you purchased a pre-cut piece of glass, skip this section and move on to Step 4. However, if you need to cut the glass to size yourself, follow the steps below: 

Step 1: Prepare Your Work Area 

Before you begin cutting the glass, make sure you have a clean and clutter-free work area. Lay down a drop cloth or towels to protect the surface you are working on. Wear safety gloves and goggles to protect your hands and eyes from any glass shards. 

Step 2: Mark Your Glass 

Lay the new glass pane on a at surface and use a tape measure and pencil to mark the width and height of the pane. Double-check your measurements before proceeding. 

Step 3: Cut Your Glass Using a glass cutter, score along the mark you made on the glass.  Apply even pressure as you score, making sure to score the glass only once. After scoring,  carefully break the glass along the score line. Use a straight edge to ensure a clean break.

Step 4: Sand Edges (Optional) 

If the edges of the glass are rough or sharp, carefully sand them down with ne-grit sandpaper. 

Step 5: Clean the Glass 

Once you have cut the glass to size, make sure to thoroughly clean it with a window cleaner and lint-free cloth. This will ensure that any dust or debris from cutting is removed. 

Cutting your own glass can be challenging, and it’s important to take proper safety precautions. If you’re unsure about cutting the glass to size yourself, consider consulting with a professional or purchasing a pre-cut piece of glass. 

Step 4: Prepare Frame for New Window Pane Insertion 

After successfully cutting the replacement glass pane to size, it’s time to prepare the metal frame to receive the new pane. 

  1. Remove any remaining glass pieces: Use a putty knife or other flat tool to carefully remove any remaining glass pieces or shards from the frame. Be sure to wear safety gloves and goggles to protect your hands and eyes from any glass fragments. 
  2. Remove old glazing compound: If your metal frame has old glazing compound, use a heat gun to soften it and a putty knife to carefully pry it away from the frame. Make sure to remove all remnants of the old compound and clean the frame thoroughly. 
  3. Install metal glazing points or spring clips: If your metal frame uses metal glazing points or spring clips, these will need to be installed before inserting the new glass pane. Use a putty knife to carefully insert the points or clips into the frame at a 45-degree angle, making sure they are secure. 
  4. Insert the new glass pane: Carefully insert the new glass pane into the prepared frame. Be sure to align the edges of the glass with the frame and press down gently to ensure a snug fit. 
  5. Secure the glass with glazing compound: Use a putty knife to apply a thin layer of glazing compound around the edges of the frame, making sure to cover the entire edge. Press the compound firmly into place and create a smooth surface along the edge. 

Congratulations, you have successfully replaced a window pane in a metal frame! Make sure to clean the new glass thoroughly and allow the glazing compound to dry completely before using the window. 

Cleaning and Preparing Wood or Metal Frame

Cleaning and Preparing Wood or Metal Frame

When it comes to replacing a window pane in a wood or metal frame, the preparation of the frame is an important step to ensure a successful installation. Cleaning and preparing the frame properly will ensure that the new pane of glass fits securely in place and that the frame is ready to receive the new glazing compound. 

Cleaning a wood frame 

Before beginning to prepare a wood frame for a new pane of glass, it is important to clean the frame thoroughly. Begin by removing any old putty or glazing compound using a putty knife or similar tool, being careful not to damage the frame itself. Next, use a wire brush or sandpaper to smooth any rough or uneven surfaces of the frame. 

After the frame has been cleaned, it is important to ensure that it is free from any debris or dust. Wipe down the frame with a clean cloth and a solution of warm water and mild soap. Be sure to rinse the frame thoroughly to remove any soap residue, and allow it to dry completely before proceeding to the next step. 

Preparing a metal frame 

When preparing a metal frame for a new pane of glass, it is important to remove any old glazing compound or adhesive that may be present. This can often be done using a heat gun to soften the compound, followed by a putty knife to carefully remove it from the frame. 

Once the old compound has been removed, use a wire brush or sandpaper to smooth any rough or uneven surfaces of the frame. This will help to ensure a secure fit for the new pane of glass. 

After preparing the frame, be sure to clean it thoroughly to remove any debris or dust. Wipe down the frame with a clean cloth and a solution of warm water and mild soap, then rinse and allow it to dry completely before installing the new pane of glass. 

By taking the time to clean and prepare the frame properly, you can ensure a successful installation and a secure fit for the new pane of glass. This will help to ensure that your new window pane is safe, secure, and functional for many years to come. 

Step 5: Insert New Window Pane into Frame

Insert New Window Pane into Frame

Now that you’ve prepared your window frame, it’s time to install the new window pane. First, make sure that you have the correct size and type of glass for your window frame. You can order replacement glass from your local hardware store or glass company. It’s important to match the type of glass, as well as the thickness, to ensure a proper fit. 

Wearing safety goggles to protect your eyes from any glass shards, carefully insert the new window pane into the frame. For single-pane windows, simply slide the pane into the groove in the frame. Double-pane windows may have metal glazing, which requires a bit more effort to install. 

To install a double-pane window, carefully place the new pane into the frame and angle it in at a 45-degree angle. Gently press the glass into place, making sure it is flush against the frame. Then, insert metal triangles or spring clips to hold the pane in place. Double check that the glass is secure before cleaning up any excess putty or glazing compound.

For vinyl frame windows, use caution when inserting the new pane to avoid damaging the frame. Aluminum windows may require special screws or clips to hold the glass in place, so be sure to consult the manufacturer’s instructions. 

Once you’ve installed the new window pane, clean up any excess putty or glazing compound using a putty knife. Smooth the compound down and let it dry according to the manufacturer’s instructions. With the new pane of glass securely in place, your window will look as good as new! 

Check Fit of Replaced Glass Piece 

Once you’ve successfully installed the new glass piece into your window frame, it’s important to check the fit before fully securing it in place. This will help ensure that the glass is properly aligned and won’t fall out or allow air to leak through. 

  1. First, check the spacing between the glass and the frame. The gap should be uniform and smooth all the way around the perimeter of the glass. If you notice any significant gaps or bulges, you may need to adjust the positioning of the glass piece. 
  2. Next, check the alignment of the glass with the surrounding window frame. The glass should be flush with the frame on all sides, without any noticeable gaps or overlaps. If it appears crooked or irregular, you may need to adjust the spring clips or metal triangles that hold the glass in place. 
  3. Finally, test the movement of the window sash to ensure that the glass is properly seated and not obstructing any movement. If the sash does not open and close smoothly, it may be necessary to remove the glass and make additional adjustments. 

Remember to wear safety goggles and gloves throughout the process, as broken glass can be extremely dangerous. With careful attention to detail and proper installation techniques, you can successfully replace a broken window glass piece with confidence.

Window pane in a metal frame

Conclusion 

In conclusion, replacing a window pane in a metal frame can seem like a daunting task, but with the right tools and knowledge, it can be a simple DIY project. Remember to always prioritize safety, wearing gloves and safety goggles, and taking extra care when handling broken glass. 

When selecting replacement glass, consider the type of window and the frame material. Single-pane windows may only require standard glass, while double-pane windows may require tempered glass with argon gas for insulation. 

The process involves removing the broken pane and applying new glazing compound to secure the replacement glass in place. Spring clips or metal triangles can also be used to hold the glass in place before applying the glazing compound. 

In some cases, it may be more cost-effective and efficient to replace the entire window rather than just the glass pane. When choosing a window replacement, consider your budget, the type of window and frame material, and any energy-efficient features, such as Low-E coatings. 

Overall, replacing a window pane in a metal frame can be a rewarding DIY project that can save you time and money. With proper preparation and attention to safety and detail, you can have your windows looking good as new in no time. 

Frequently Asked Questions About Replacing a Window Pane in a Metal Frame

What type of replacement glass should I choose?

Single-pane windows may only require standard glass, while double-pane windows may require tempered glass with argon gas for insulation. Be sure to select the proper type of replacement glass for your window frame material and style.

What tools will I need to complete this project?

You'll need gloves, safety goggles, a new pane of glass that fits your window frame, glazing compound, and basic tools such as pliers and a putty knife. You may also need additional tools such as spring clips or metal triangles depending on how your window was originally secured.

How do I secure the new piece of glass into the frame?

Once you have fit the new piece of glass into place, secure it using either glazing compound or spring clips/metal triangles (or both). Make sure to double-check that the spacing between the glass and frame is even and uniform before securing in place.